Xerox ColorQube 8900 - Page 149

Faxing
ColorQube 8700/8900 Color Multifunction Printer 149
User Guide
Adjusting the Contrast
Contrast is the relative difference between light and dark areas in an image.
To adjust the contrast:
1. Press the Services Home button, then touch Server Fax.
2. Touch the Image Quality tab, then touch Image Enhancement.
3. On the Image Enhancement screen, adjust the contrast:
 Manual Contrast allows you to adjust the contrast manually. Under Manual Contrast, move the
slider up or down to increase or decrease the contrast. The middle position on the slider, Normal,
does not change the contrast.
 Auto Contrast allows the printer to set the contrast automatically.
4. Touch Save.
Specifying the Orientation of the Original
1. Press the Services Home button, then touch Server Fax.
2. Touch the Layout Adjustment tab, then touch Original Orientation.
3. On the Original Orientation screen, touch the desired orientation:
 Upright Images and Sideways Images refer to the direction the originals are loaded in the
document feeder.
 Portrait Originals and Landscape Originals refer to the images on the originals.
Note: If you are using the document glass, the orientation of the original is as seen before turning
it over.
4. Touch Save.
Specifying the Size of the Original
To ensure that you are scanning the correct area of the documents, specify the original size.
To specify the original size:
1. Press the Services Home button, then touch Server Fax.
2. Touch the Layout Adjustment tab, then touch Original Size.
3. On the Original Size screen, select one of the following:
 Auto Detect allows the printer to determine the size of the original.
 Preset Scan Areas specifies the area to scan when it matches a standard paper size. In the
scrolling list, touch the desired paper size.
 Custom Scan Area allows you to specify the height and width of the area to scan. Touch the
Height-Y and Width-X arrows to specify the area.
 Mixed Size Originals allows you to scan standard-size originals of varying sizes. Use the
diagram on the screen to determine which original sizes can be mixed in the same job.
4. Touch Save.