Xerox Copycentre C118

14 Glossary
218 Xerox CopyCentre/WorkCentre 118 User Guide
Border limit One more sheet is used when the length of the transmitted
document exceeds the length of paper installed on the
receiving terminal. A margin at the bottom of a received
document can be eliminated so that the data can be printed on
one page. The amount of space that can be removed from the
bottom of a document is the border limit. When the border limit
value is small, the data is printed on the next page. But when it
is large, a larger space can be cut so that data can be printed
on one page.
BPS An abbreviation of Bits Per Second. This is a measure of how
fast a modem can transmit or receive data.
Bulletin Board Allows you to store documents in the specific box on the
machine and retrieve repeatedly the same documents using
the remote machines.
Chain Dialing Specifies a destination combining multiple Speed Dial codes,
One Touch Dial, and dialing using the numeric keypad.
Collated Output programming where each copy set is delivered in the
same order the documents were placed in the Document
Feeder. Example: Two copies of a three-page document
would output as page1/copy1, page2/copy1, page3/copy1,
page1/copy2, page2/copy2, page3/copy2.
Comments To (recipient) and From (sender) lines on a fax cover page.
Communication(s) Communications network which can offer audio data
(telephone), image data (fax), picture data (videotext) and PC
data (PC communication service) over the same channel. In
this guide, referred to as transmitting and receiving images as
well as speaking with a remote user.
Copy Sets Groups of copies of a multi-page set of documents. If you
have a four-page document and want to make 10 copies of a
document, you will be making 10 copy sets.
Custom Paper A paper size that can be specified by user other than standard
size.
DADF An abbreviation of Duplex Automatic Document Feeder.
Default Setting(s) The settings used by the machine when the user does not
specify settings.
Delayed Polling Retrieving documents from a remote fax machine at a delayed
time.
Delayed Start Programming that enables the machine to process a
document at a later time.
Dial To use a telephone number for document transmission. The
methods of dialing provided by the machine include: manual
dialing using the numeric keypad, Speed Dialing, One Touch
Dialing, and using the Address Book, etc.