EasyManua.ls Logo

Xerox Copycentre C118

Xerox Copycentre C118
230 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Terms Defined
Xerox CopyCentre/WorkCentre 118 User Guide 219
Dial Tone A tone sounds from the telephone line when a remote
machine receives a call. You will then know that you are
connected to the line.
Dialing Characters Special characters used to enter the dial pause, etc.
Digital Copier A copier that scans an image once to make one or many
copies.
Direct Send Allows you to start sending a fax immediately after scanning
the first page of documents.
Document In this guide, the image data generated when an original is
scanned. Used in terms such as transmitted document and
received document.
Document Feeder An assembly that automatically separates and feeds single-
sided document (when ADF is installed) or double-sided
document (when DADF is installed) from the input tray into the
scanner.
DPI An abbreviation of Dots Per Inch, which is the number of dots
that can be printed within a width of one inch (25.4 mm).
Duplex Refers to a document that contains an image on both sides of
the page.
ECM Error Correction Mode: An ITU-T approved feature for Group
3 facsimile machines. ECM transmission sends the document
image data in segments and retransmits segments that the
remote machine receives incorrectly.
Emulation The ability of the printer to perform the features of other
printers. The mode is called emulation mode.
Ethernet A network transport technology commonly used to send data
from one node to another.
F Code Communication This function provides a facsimile communication function
using codes such as Sub-Address (SUB), Selective Polling
(SEP), and Password (PWD). All defined in the G3 Standards
of the ITU-T. The F Code enables confidential transmission
and bulletin communications between facsimiles that support
F Code protocol.
Factory Default (s) Settings which are incorporated into the machine at the
factory and used by the machine when the user does not
specify settings.
Fault Code A code that is displayed on the control panel or a report when
a problem occurs.
Fax (Facsimile) A document that is transferred from one location to another
via a telephone line.
Frame Type A group of data sent through the network.

Table of Contents

Other manuals for Xerox Copycentre C118

Related product manuals