XEROX COPYCENTRE/WORKCENTRE PRO C2128/C2636/C3545 QUICK REFERENCE GUIDE PAGE 6-11
NETWORK SCANNING
Sides Scanned
This is used to specify whether the originals are single-sided or double-sided. For
2-sided originals the orientation can also be programmed.
Options:
1 SIDED Use this option for originals that are printed on 1 side only.
2 SIDED Use this option for originals that are printed on both sides.
2 SIDED, ROTATE
SIDE 2
Use this option for originals that are printed on both sides. This option creates
documents which can be read in a “head to toe” manner, for example a calendar.
IMAGE
ORIENTATION
Use this option to identify the image orientation before scanning.
To Next Page
Loading...
Need help?
General
