PAGE 3-4 XEROX COPYCENTRE/WORKCENTRE PRO C2128/C2636/C3545 QUICK REFERENCE GUIDE
COPY
Output
Output is used to select the finishing requirements for the job. The options will
depend on the finishing output device available.
Options:
COLLATED Select Collated for output stacked in sets to match the sequence of the originals.
UNCOLLATED Select Uncollated for output sorted into stacks of individual pages.
The above output will be delivered in one of the following depending on the output
tray:
STAPLED Available if the CopyCentre/WorkCentre Pro is equipped with the Office Finisher,
which offers a selection of single or double stapling options. Collated and uncollated
stapled sets will be delivered offset to the finisher.
L Staples 2 - 50 sheets. The 50-sheet maximum applies to up to 24lb / 90 gsm
paper.
PUNCHED Available if the CopyCentre/WorkCentre Pro is equipped with the Advanced Office
Finisher or the Professional Finisher (with Booklet Maker), which offer a selection
of stapling and hole punching options.
FOLDED Available if the CopyCentre/WorkCentre Pro is equipped with the Professional
Finisher (with Booklet Maker), which offers a selection of stapling, hole punching,
folding, and booklet making options.
WITH OFFSET
Each copy set will be slightly offset to allow easy separation.
WITHOUT OFFSET
The copy sets will not be offset.
To Next Page
Loading...
Need help?
General
