PAGE 3-6 XEROX COPYCENTRE/WORKCENTRE PRO C2128/C2636/C3545 QUICK REFERENCE GUIDE
COPY
Reduce/Enlarge
The Reduce / Enlarge option provides a variety of reduction and enlargement
options. Originals placed on the Document Glass or sent to the machine
electronically can be reduced or enlarged between 25% to 400%. Originals fed
through the Document Handler can be reduced or enlarged between 25% to 200%.
The preset Reduce/Enlarge options that appear on the Copy tab can be set in Tools
mode.
Options:
The following options appear after pressing the More... button on the Copy tab.
NORMAL Use this option to proportionately reduce or enlarge the output image in both
directions by the % selected.
Normal options are as follows
100%
Produces an image on the copies the same size as the image
on the original.
AUTO %
Proportionally reduces or enlarges the image on the copies
based on the size of the original and the size of the selected
output paper.
% SET 25 - 400
Use this option to select the percentage of reduction or
enlargement required using the keypad on the control panel.
To use the keypad, select the box displaying the current
reduce/enlarge percentage.
The scroll buttons can also be used to adjust the reduce/
enlarge percentage, in 1% increments.
PRESET OPTIONS
The most commonly used reduce/enlarge percentages have
been provided as preset options. These preset options can be
customized to meet individual needs.
To Next Page
Loading...
Need help?
General
