XEROX COPYCENTRE/WORKCENTRE PRO C2128/C2636/C3545 QUICK REFERENCE GUIDE PAGE 8-3
PRINT
PRINTER DRIVER FEATURES...
There are a number of Printer Drivers available for the CopyCentre/WorkCentre
Pro. The features available will depend on the printer driver being used. The
following descriptions provide an overview of the typical features provided by the
CopyCentre/WorkCentre Pro Printer Drivers.
For information about a specific Printer Driver feature, please refer to the on-line
Help facility provided as part of the Printer Driver software.
Control Options
There are a number of options which appear on all of the printer driver screens:
OK Saves all the new settings and closes the driver or dialog. These new settings
remain in effect until changed.
CANCEL Closes the dialog and returns all settings in the tabs to the values that were in place
before the dialog was opened. Any changes made are lost.
APPLY Saves all the changes made without closing the driver.
DEFAULTS Resets the current tab and all its settings to the system default values. The action
of this button applies only to the current tab. All other tabs remain unchanged.
DEFAULT ALL Resets options to default system values on the Paper Output, Layout, and Image
Options tabs. Other features and tabs may not have specific default settings and will
not be affected by this button.
HELP Select Help in the bottom right of the printer driver screen or [F1] on the PC
keyboard for information on the displayed printer driver screen.
If the tip of the mouse pointer is rested on top of a control, Microsoft Windows will
display a brief Help Tip about that control. If the right mouse button selects a control,
the Help system provides more detailed information.
To Next Page
Loading...
Need help?
General
