XEROX COPYCENTRE/WORKCENTRE PRO C2128/C2636/C3545 QUICK REFERENCE GUIDE PAGE 4-19
FAX
Delayed Send
Use Delayed Send to specify a time at which to send a fax. The time can be set
between 15 minutes and 23 hours 59 minutes. This feature is very useful when
transmitting faxes during off-peak hours or when sending to another country or time
zone.
A 12 or 24 hour clock can be set. If the 12 hour clock is set, you must also select
either the AM or PM button.
NOTE: Batch Send is a feature, which is set up by your System Administrator. It
allows multiple fax jobs to be sent to the same destination during the same
transmission session. If sending a fax job that has the same destination as a job
already held as a Delayed Send job, a pop-up window will be displayed on the
touch screen asking you whether to send your fax now or add it to the job being
sent at a later time. Select the option required to complete your job.
Options:
OFF The feature is switched off.
SPECIFIC TIME Enables users to enter the actual time the fax is to be sent.
To Next Page
Loading...
Need help?
General
