XEROX COPYCENTRE/WORKCENTRE PRO C2128/C2636/C3545 QUICK REFERENCE GUIDE PAGE 3-31
COPY
Sample Set
This feature is used to review the output to ensure that it is exactly what is required
prior to printing a large quantity.
Options:
OFF The feature is switched off.
ON Use to enable the Sample Set feature. One complete set of the job will be printed.
To print the remainder of the job, press the Job Status button and select your job in
the queue.
If the output is acceptable, select Release, the job will be completed.
If the output was not acceptable or the job is no longer required, select Delete to
delete the job from the queue. Reprogram and rescan the entire job.
To Next Page
Loading...
Need help?
General
