PAGE 1-12 XEROX COPYCENTRE/WORKCENTRE PRO C2128/C2636/C3545 QUICK REFERENCE GUIDE
WELCOME
Laser Safety
This product complies with safety standards and is certified as a Class 1 Laser
product under the Center for Devices and Radiological Health (CDRH) of the US
Food and Drug Administration (FDA) implemented regulations for laser products.
This product complies with FDA 21 CFR 1940.10 and 1040.11 except for deviations
pursuant to Laser Notice No. 50, dated 26 July 2001. These regulations apply to
laser products marketed in the United States.The label on the machine indicates
compliance with CDRH regulations and must be attached to laser products
marketed in the United States. This product does not emit hazardous laser
radiation.
CAUTION:Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous exposure of laser
light.
Since radiation emitted inside this product is completely confined within the
protective housing and external covers, the laser beam cannot escape from the
machine during any phase of the user operation.
This product contains laser warning labels. These labels are intended for use by
Xerox Service Representatives and are placed on or near panels or shields that
require special tools for removal. Do not remove any of the panels. There are no
operator serviceable areas inside these covers.
Safety Standards
This Xerox product is safety certified by Underwriters Laboratories Incorporated to
Standards UL60950, 3rd Edition (2000), and CSA International CAN/CSA C22.2
No.60950-00 3rd Edition.
To Next Page
Loading...
Need help?
General
