XEROX COPYCENTRE/WORKCENTRE PRO C2128/C2636/C3545 QUICK REFERENCE GUIDE PAGE 2-5
GETTING STARTED
LOADING PAPER...
1
¾ Open the required paper tray.
NOTE: For the Tray 1 plus High Capacity Feeder Option, Paper Trays 1 and
are fully adjustable, while Paper Trays 3 and 4 are dedicated paper trays which
hold 8.5" x 11" long edge feed paper only. For the Tray 1 plus 3-Tray Option,
Paper Trays 1 to 4 are fully adjustable. For the Tray 1 plus 1-Tray Option, Pape
Trays 1 and 2 are fully adjustable.
2
¾ Load paper. Paper must not be loaded above the fill line.
¾ Close the tray
NOTE: For Paper Trays 1 to 4, make sure the guides are just touching the
paper, otherwise the size automatically detected may be incorrect.
3
¾ Select [Confirm] OR select [Change Size] and/or [Change Description] to
reprogram the tray if the paper size, type or color has changed.
NOTE: Make sure the Size, Type and Color are all correct. For standard copy
paper the following should apply:
Size - 8.5"x11"
Type - Plain paper
Color - White
To Next Page
Loading...
Need help?
General
