EasyManua.ls Logo

Xerox WorkCentre 5230A - Specifications for the Fax Service

Xerox WorkCentre 5230A
454 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16 Appendix
436
Specifications for the Fax Service
Fax Transmission Speed
Automatic fallback: 33.6 Kbps
Page Transmission Time - ITU No. 1 document
33.6 Kbps (standard): less than 4* seconds (*: reference data)
Telephone Line Type
Standard public analogue switched telephone line or equivalent
Compatibility
Super G3, ECM, G3
Resolution Capability
Standard: 200 × 100 dpi (8 × 3.85 lines/mm)
Fine: 200 × 200 dpi (8 × 7.7 lines/mm)
Superfine: 400 × 400 dpi (16 × 15.4 lines/mm)
Superfine: 600 × 600 dpi
Resolution Conversion
Available for sending and receiving; smooth on receiving
Image Compression
JBIG, MH, MR, MMR
Long Page Scan Feature
600 mm (23.6 inches) maximum length
NOTE: This feature is only available when the document feeder is used.
NOTE: This feature is not available in double-sided mode.
NOTE: When using this feature to scan long documents which exceed 432 mm (17.0
inches), the operator must feed the document one sheet at a time. The paper weight
should be between 60 and 90 g/m
2
.
Connection Approvals
EU/EEA: certified to TBR21
USA: approved to FCC Pt 68
Canada: approved to DOC CS-03
Other countries: certified to national PTT standards

Table of Contents

Related product manuals