Xerox WorkCentre 5230A - Supported Paper Types

2 Paper and Other Media
26
Paper Trays - Non-standard Sizes
Output Trays/Duplex Module - Non-standard Sizes
Supported Paper Types
The following table lists the paper types supported by each paper tray, duplex module,
and the finisher.
Paper Trays
Paper
Size
Tray 1, 2
/
Tray 3, 4
(Two Tray
Modules)
Tray 3, 4
(High Capacity
Tandem Tray)
Tray 5
(Bypass)
Tray 6
(High Capacity
Feeder)
Envelope Tray
Width 139.7-297.0 mm
5.5-11.8”
Not Available
88.9-297.0 mm
3.6-11.8”
Not Available
148.7-241.0 mm
5.9-9.6"
Length 182.0-431.8 mm
7.2-17.2”
98.4-431.8 mm
3.9-17.2”
98.4-162.0 mm
3.9-6.4”
Paper
Size
Center Tray Left Side Tray
Integrated
Office Finisher
Office Finisher
LX
Duplex Module
Width 88.9-297.0 mm
3.6-11.9”
88.9-297.0 mm
3.6-11.9”
88.9-297.0 mm
3.6-11.9”
210.0-297.0 mm
8.4-11.9”
139.7-297.0 mm
3.5-11.9”
Length 98.4-431.8 mm
3.9-17.2”
98.4-432.0 mm
3.9-17.3”
98.4-431.8mm
3.9-17.2”
182.0-431.8 mm
7.3-17.2”
182.0-431.8 mm
5.1-17.2”
Paper Type
Weight g/m
2
Tray 1
Tray 2,
Tray 3, 4
(Two Tray
Module/
High Capacity
Tandem Tray)
Tray 5
(Bypass)
Tray 6
(High
Capacity
Feeder)
Envelope
Tray
Plain
60-105
OOOO
Plain Reload*
1
OOOO
Recycled O O O O
Custom Paper
1 - 5
OOOO
Hole Punched O O O O
Letterhead O O O O
Pre-Printed O O O O
Other O O O O
Lightweight 56-63 O O O O
Heavyweight 106-169 O O O
Extra
Heavyweight
170-215
OOO
Bond Paper
170-215
OOO
Envelope
170-215
OO