14 Authentication and Account Administration
346
4.
Ensure that Network Accounting is configured. Enter the machine’s IP address on
your web browser to access CentreWare Internet Services. Click the [Properties]
tab, expand the [Security] folder, click [Authentication Configuration], and select
[Xerox Secure Access] for [Login Type], matched to [Network Accounting] for
[Accounting Type].
For instructions on setting up your Network Accounting server, refer to the
instructions that came with your accounting package, as well as
Network
Authentication Setup on page 344
.
You may also need another Authentication Server (running LDAP in an ADS
environment, for example) to communicate with the Secure Access Server
providing that server with user credentialing information. A second Authentication
Server may be necessary for web User Interface Authentication, if this feature is
additionally desired.
Configuring Xerox Secure Access to Work with Remote Authentication
At Your Workstation:
1.
Open your web browser and enter the TCP/IP address of the machine in the
[Address] or [Location] field. Click [Enter] to access CentreWare Internet Services.
2.
Click the [Properties] tab.
3.
Expand the [Security] folder, and then click [Authentication Configuration]. The
[Authentication Configuration > Step 1 of 2] page appears.
4.
Select [Xerox Secure Access] from the [Login Type] drop-down list.
5.
Click [Apply] to reboot the machine.
6.
Expand the [Security] folder, and then click [Authentication Configuration]. On the
[Authentication Configuration > Step 1 of 2 area] page:
a) Select the [Enabled] box for each service that you wish to restrict access to. Do
not place a checkmark in the [Non-account Print] box if you wish to enable users
without accounts to continue to print.
b) Click [Apply], and then reboot the machine following the prompt.
c) Click [Next]. The [Authentication Configuration > Step 2 of 2] page appears.
7.
On the [Authentication Configuration > Step 2 of 2] page, select [Configure] for
[Authentication System]. The [Authentication System] page appears.
Enabling Specific Xerox Secure Access Settings
1.
Open your web browser and enter the TCP/IP address of the machine in the
[Address] or [Location] field. Click [Enter].
2.
Click the [Properties] tab.
3.
Expand the [Security] folder, and then the [Remote Authentication Servers] folder.
4.
Click [Xerox Secure Access Settings].
5.
In [Xerox Secure Access Settings]:
a) Enter text into the [Default Prompt] and [Default Title] boxes to create the prompt
and prompt title that will be displayed on the machine’s screen informing users
how to authenticate themselves at the machine.
To Next Page
Loading...
