Yadea Y1S Series - Disassembly and Installation of USB Interface; Disassembly and Installation of Mirrors

PREMIUM E-MOBILITY
YD-EM279
32
21
1
3.2.10 Disassembly and installation of USB interface
3.2.10.1 Service tools
●
Cross screwdriver
●
Straight screwdriver
3.2.10.2 Disassembly and installation
Disassembly
●
Park the vehicle on a horizontal road surface to
support the main bracket.
●
Close the key and pull it out.
●
Open the seat cushion and turn off the air switch.
●
Disassembly the front wall. → page 51
●
Press the retention card - arrow - .
●
Disconnect the USB connector.
●
Disassembly the USB port - 1 -.
Installation
Installation is carried out in reverse order of disassembly.
3.2.11 Disassembly and installation of mirrors
3.2.11.1 Service tools
●
Open wrench14mm
3.2.11.2 Disassembly and installation
Disassembly
●
Park the vehicle on a horizontal road surface to
support the main bracket.
●
Flick the dust cover up - arrow - .
●
Loosen the bolt - arrow - Disassembly the rearview
mirror - 1 -.
Installation
Installation is carried out in reverse order of disassembly.