Yadea Y1S Series - Wiring Harness; Overview; Assembly Overview; Disassembly and Installation of Cable

YD-EM279
43
PREMIUM E-MOBILITY
3.4 Wiring harness
3.4.1 Overview
The vehicle wiring harness is mainly the cable.
3.4.2 Assembly overview
1. Cable
3.4.3 Disassembly and installation of cable
3.4.3.1 Service tools
●
Cross screwdriver
3.4.3.2 Disassembly and installation
Disassembly
●
Park the vehicle on a horizontal road surface to
support the main bracket.
●
Close the key and pull it out.
●
Open the seat cushion and turn off the air switch.
●
Disassembly the front wall. → page 51
●
Disassembly the shelf side panels. → page 60
●
Disassembly the foot pedals. → page 55
●
Disconnect the connector.
●
Disconnect the retention card - arrow - .
1