YD-EM279
25
PREMIUM E-MOBILITY
(3) Throttle check:
Turn the throttle to the maximum and
measure the voltage of the throttle signal
line to ground with the DC gear of the
multimeter, which shall be 0.8 - 3.6V
Abnormal
voltage
Check the throttle wiring loop
Normal voltage
Judge throttle OK
3.2.5 Disassembly and installing the immobilizer
3.2.5.1 Service tools
●
Cross screwdriver
3.2.5.2 Disassembly and installation
Disassembly
●
Park the vehicle on the level road and support the
main support.
●
Open the seat cushion and turn off the air switch.
●
Disassembly the front wall. → page 51
●
Disassembly Bolt - Arrow - .
●
Disconnect connector - arrow A -.
●
Disassembly the immobilizer - 1 -.
Installation
Installation is carried out in reverse order of disassembly.
1
A
To Next Page
Loading...
Need help?
General
