Yadea Y1S Series - Interior Trim Parts; Front Inner Fender Disassembly;Installation

YD-EM279
63
PREMIUM E-MOBILITY
5.2 Interior trim parts
5.2.1 Assembly overview
1. Rear inner fender
2. Base plate
3. Front inner fender
5.2.2 Disassembly and installation of the front inner fende
5.2.2.1 Service tools
●
Cross screwdriver
●
Sleeve 10mm
5.2.2.2 Disassembly and installation
Disassembly
●
Park the vehicle on a horizontal road surface to
support the main bracket.
●
Close the key and pull it out.
●
Open the seat cushion and turn off the air switch.
●
Disassembly the internal windshield. → page 52
●
Disassembly the headlamp. → page 37
●
Disassembly the side brackets. → Page 45
●
Disassembly screw - arrow - .
●
Disassembly the inner mud plate connection plate -
1 -.
1
3 2
1