Yadea Y1S Series - Disassembly and Installation of Lock Set; Disassembly and Installation Hooks

PREMIUM E-MOBILITY
YD-EM279
54
21
1
5.1.6 Disassembly and installation of lock set
5.1.6.1 Service tools
●
Cross screwdriver
5.1.6.2 Disassembly and installation
Disassembly
●
Park the vehicle on a horizontal road surface to
support the main bracket.
●
Close the key and pull it out.
●
Open the seat cushion and turn off the air switch.
●
Disassembly the front wall. → page 51
●
Rotate the sleeve lock along the - arrow - direction.
●
Disassembly the sleeve lock - 1 -.
Installation
Installation is carried out in reverse order of disassembly.
5.1.7 Disassembly and installation Hooks
5.1.7.1 Service tools
●
Cross screwdriver
●
Sleeve 10mm
5.1.7.2 Disassembly and installation
Disassembly
●
Park the vehicle on a horizontal road surface to
support the main bracket.
●
Push the coat hook away to maintain a horizontal
position.
●
Disassembly the internal windshield. → page 52
●
Release the retention card - arrow - .
●
Disassembly the hook - 1 -.
Installation
Installation is carried out in reverse order of disassembly.