Yadea Y1S Series - Disassembly and Installation of the Seat Cushion Lock Plate

YD-EM279
49
PREMIUM E-MOBILITY
4.1.8 Disassembly and installation of the seat cushion lock plate
4.1.8.1 Service tools
●
Sleeve 10mm
4.1.8.2 Disassembly and installation
Disassembly
●
LengthPark the vehicle on a horizontal road surface
to support the main bracket.
●
Close the key and pull it out.
●
Open the seat cushion and turn off the air switch.
●
Disassembly the seat barrel. → page 58
●
Disassembly Bolt - Arrow - .
●
Detach from the seat cushion lock plate and
Disassembly the pull lock.
●
Disassembly the seat cushion lock plate - 1 -.
Installation
Installation is carried out in reverse order of disassembly.
H614.1117!!!
2