YD-EM279
37
PREMIUM E-MOBILITY
3.3 Lighting
Overview
The lighting signal devices, including the headlight and taillight (registration plate lamp), etc., are mainly used to pro-
vide illumination for the driver and alert other vehicles when driving at night to ensure driving safety.
The signal devices, including the direction indicator lamp, horn and stop lamp, are used to indicate the driving state of
the vehicle for the driver and relevant personnel, and express the driver's operation intention through sound and light
signals.
3.3.1 Assembly overview
1. Headlamps
2. Front logo light
3. AOTO lamp
4. Front right turn signal
5. Front left turn signal
6. Rear logo light
7. Rear taillights
8. License plate lamp
3.3.2 Disassembly and installation of headlight
3.3.2.1 Overview
The headlight can illuminate the road ahead of the driver, so that it is easy to identify the various road conditions on
the way and the traffic, and can signal to the oncoming people and vehicles. The headlight can be flashed to express
the intention of overtaking the vehicle in front. When driving in foggy days, the headlight is often turned on to ensure
driving safety.
3.3.2.2 Service tools
●
Cross screwdriver
3.3.2.3 Disassembly and installation
Disassembly
●
Park the vehicle on a horizontal road surface to
support the main bracket.
●
Close the key and pull it out.
●
Open the seat cushion and turn off the air switch.
●
Disassembly the front wall. → page 51
●
Disassembly screw - arrow - .
27
28
29
210
25
26
1 2 3 4
To Next Page
Loading...
Need help?
General
