REAR WHEEL
4-17
• Collar (brake disc side) “2”
NOTE:
The collar (brake disc side) has marks “a” to dis-
tinguish it from the collar (wheel sprocket side).
5. Adjust:
• Drive chain slack
Refer to “ADJUSTING THE DRIVE CHAIN
SLACK” on page 3-24.
6. Install:
• Rear brake caliper
WARNING
EWA13500
Make sure the brake hose is routed properly.
Drive chain slack
40.0–50.0 mm (1.57–1.97 in)
T
R
.
.
Rear brake caliper bolt (M12)
27 Nm (2.7 m·kg, 19 ft·lb)
Rear brake caliper bolt (M8)
22 Nm (2.2 m·kg, 16 ft·lb)
LOCTITE
®
1 2
a
To Next Page
Loading...
