Yamaha MT-01 T 2005 - Page 15

FEATURES
1-6
The brightness can be adjusted for the following:
• the tachometer panel (item number “1”)
• the LCD (item number “2”)
• the tachometer needle (item number “3”)
Select the brightness control mode as follows.
1. Turn the key to “OFF”.
2. Push and hold the “SELECT” button.
3. Turn the key to “ON”, and then release the
“SELECT” button after five seconds.
Item number “1” is displayed.
4. Adjust the tachometer panel brightness level
by pushing the “RESET” button.
5. Push the “SELECT” button to select the LCD.
Item number “2” is displayed.
Adjust the LCD brightness level by pushing
the “RESET” button.
6. Push the “SELECT” button to select the ta-
chometer needle.
Item number “3” is displayed.
Adjust the tachometer needle brightness lev-
el by pushing the “RESET” button.
7. Push the “SELECT” button and the multi-
function display will return to the odometer or
tripmeter mode.
3. Tachometer needle
1. Tachometer panel
2. Item number
3. Brightness level
1. LCD
2. Item number
3. Brightness level
1
2
3
1
23
1. Tachometer needle
2. Item number
3. Brightness level
1
23