IGNITION SYSTEM
7-4
NG →
OK ↓
NG →
OK ↓
NG →
OK ↓
NG →
OK ↓
NG →
OK ↓
NG →
OK ↓
NG →
OK ↓
NG →
OK ↓
NG →
OK ↓
8. Check the main switch.
Refer to “CHECKING THE
SWITCHES” on page 7-89.
Replace the main switch/immobilizer unit.
9. Check the engine stop switch.
Refer to “CHECKING THE
SWITCHES” on page 7-89.
Replace the right handlebar switch.
10.Check the neutral switch.
Refer to “CHECKING THE
SWITCHES” on page 7-89.
Replace the neutral switch.
11.Check the sidestand switch.
Refer to “CHECKING THE
SWITCHES” on page 7-89.
Replace the sidestand switch.
12.Check the clutch switch.
Refer to “CHECKING THE
SWITCHES” on page 7-89.
Replace the clutch switch.
13.Check the relay unit (starting circuit
cut-off relay).
Refer to “CHECKING THE
RELAYS” on page 7-96.
Replace the relay unit.
14.Check the relay unit (diode).
Refer to “CHECKING THE RELAY
UNIT (DIODE)” on page 7-98.
Replace the relay unit.
15.Check the lean angle cut-off switch.
Refer to “CHECKING THE LEAN
ANGLE CUT-OFF SWITCH” on
page 7-100.
Replace the lean angle cut-off switch.
16.Check the entire ignition system
wiring.
Refer to “CIRCUIT DIAGRAM” on
page 7-1.
Properly connect or repair the ignition
system wiring.
Replace the ECU.
To Next Page
Loading...
