ENGINE
3-12
6. Remove:
• Engine oil drain bolt (crankcase) “1”
7. Drain:
• Engine oil
(completely from the oil tank and crankcase)
8. If the oil filter cartridge is also to be replaced,
perform the following procedure.
▼▼▼▼▼▼▼▼▼ ▼ ▼▼▼▼▼▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼
a. Remove the rectifier/regulator “1”.
b. Remove the oil filter cartridge “1” with an oil
filter wrench “2”.
c. Lubricate the O-ring “1” of the new oil filter
cartridge with a thin coat of engine oil.
CAUTION:
EC5YU1019
Make sure the O-ring “1” is positioned cor-
rectly in the groove of the oil filter cartridge.
d. Tighten the new oil filter cartridge to specifi-
cation with an oil filter wrench.
e. Install the rectifier/regulator.
▲▲▲▲▲▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲
9. Check:
• Engine oil drain bolt gaskets
Damage → Replace.
10.Install:
• Engine oil drain bolt (crankcase)
(along with the gasket)
• Engine oil drain bolt (oil tank)
(along with the gasket)
11.Fill:
• Oil tank
(with the specified amount of the recom-
mended engine oil)
Oil filter wrench
90890-01426
YU-38411
1
1
1
1
1
2
2
T
R
.
.
Oil filter cartridge
17 Nm (1.7 m·kg, 12 ft·lb)
T
R
.
.
Rectifier/regulator bolt
7 Nm (0.7 m·kg, 5.1 ft·lb)
T
R
.
.
Engine oil drain bolt (crankcase)
43 Nm (4.3 m·kg, 31 ft·lb)
T
R
.
.
Engine oil drain bolt (oil tank)
35 Nm (3.5 m·kg, 25 ft·lb)
Engine oil quantity
Total amount
5.00 L (5.29 US qt) (4.40 Imp.qt)
Without oil filter cartridge
replacement
3.70 L (3.91 US qt) (3.26 Imp.qt)
With oil filter cartridge
replacement
4.10 L (4.33 US qt) (3.61 Imp.qt)
To Next Page
Loading...
