YASKAWA FSDrive-MV1000 - Page 58

1.3 Parameter Table
58 YASKAWA ELECTRIC TOEP C710687 03B FSDrive-MV1000 Parameter Guide
2F Maintenance Period
Closed: Cooling fan, electrolytic capacitors, IGBTs, or the soft charge bypass relay may
require maintenance.
189
30 During Torque Limit
Closed: When the torque limit has been reached.
189
31 During Speed Limit
Closed: Speed limit has been reached.
190
32
During Speed Limit in Torque
Control
Closed: Speed limit has been reached while using Torque Control.
190
37 During Frequency Output
Open: Either the drive has stopped or baseblock, DC Injection Braking, or Initial
Excitation is being performed.
Closed: Drive is running the motor (not in a baseblock state and DC Injection is not
being performed).
190
38 Drive Enabled
Closed: Contact input set for “Drive enable” is closed (H1- = 6A)
190
39 Watt Hour Pulse Output
Output units are determined by H2-06. Outputs a pulse every 200 ms to indicate the
kWh count.
190
3A
Cooling Fan, Transformer
Abnormal Temperature
Rise
Closed: No abnormal temperature rise in the cooling fans or transformers has occurred.
190
3C LOCAL/REMOTE Status
Open: REMOTE
Closed: LOCAL
190
3D During Speed Search
Closed: Speed Search is being executed.
190
3E PID Feedback Low
Closed: PID feedback level is too low.
190
3F PID Feedback High
Closed: The PID feedback level is too high.
191
40
Close Command for
Commercial Power Supply
Side Breaker
Open: Open Command
Closed: Close Command
Note: Use this setting if the Synchronous Transfer is used.
191
41
Close Command for Drive
Secondary Side Breaker
Open: Open Command
Closed: Close Command
Note: Use this setting if the Synchronous Transfer is used.
191
42
Completion Signal for
Synchronous Transfer
Open: The Synchronous Transfer is in progress or it is not used.
Closed: The Synchronous Transfer to commercial power supply completed.
Note: Use this setting if the Synchronous Transfer is used.
191
4C During Fast Stop
Closed: A Fast Stop command has been entered from the operator or input terminals.
191
4D oH Pre-Alarm Time Limit
Closed: oH pre-alarm time limit has passed.
191
60 Internal Cooling Fan Alarm
Closed: Internal cooling fan alarm
191
H2 Contact Output Settings
H2-
Setting
Function Description Page
All Modes
common_
CLV
V/f
OLV
common
CLV
V/f
OLV
common
CLV
V/f
OLV
common
All Modes
common_
All Modes
common_
All Modes
common_
All Modes
common_
All Modes
common_
All Modes
common
All Modes
common_
All Modes
common_
All Modes
common_
All Modes
common_
All Modes
common_
All Modes
common_
All Modes
common_
All Modes
common_
MV1000ParameterGuide_E_conditional.book 58 ページ ２０１３年１０月１１日 金曜日 午後８時１８分