YASKAWA HV600

5.14 Z: Bypass Parameters
448 YASKAWA SIEPYAIH6B01A HV600 AC Drive Bypass Technical Reference
Setting Value Function Reference
16 Drive Fault Active
450
17 Bypass Fault Active
450
18 Auto Transfer Active
450
19 Serial Run Active
450
20 Damper Actuator Output
450
21 ON Always
451
22 Loss of Load Detected
451
Setting Value Function Reference
23 Run Verify Active
451
24 Soft Starter Run Command
451
25 Safeties Closed
451
26 Mirror HV600 M1-M2
451
27 Mirror HV600 M3-M4
451
28 Mirror HV600 M5-M6
452
99 Not Used
452
■ Z2-23: Digital Output 7 (TB1 1~3)
No.
(Hex.)
Name Description
Default
(Range)
Z2-23
(8579)
Digital Output 7 (TB1 1~3) Sets the function for bypass digital output 7. 7
(0 - 99)
■ Z2-24: Digital Output 8 (TB1 4~6)
No.
(Hex.)
Name Description
Default
(Range)
Z2-24
(857A)
Digital Output 8 (TB1 4~6) Sets the function for bypass digital output 8. 10
(0 - 99)
■ Z2-25: Digital Output 9 (TB1 7~9)
No.
(Hex.)
Name Description
Default
(Range)
Z2-25
(857B)
Digital Output 9 (TB1 7~9) Sets the function for bypass digital output 9. 12
(0 - 99)
■ Z2-26: Digital Output 10 (TB1 10~12)
No.
(Hex.)
Name Description
Default
(Range)
Z2-26
(857C)
Digital Output 10 (TB1
10~12)
Sets the function for bypass digital output 10. 15
(0 - 99)
■ Digital Output Setting Value
Selects a function set with Z2-23 to Z2-26.
0: Serial Communication Control
Setting Value Function Description
0 Serial Communication
Control
Set when serial communications controls the bypass.
1: K1 Drive Input Contactor
Setting Value Function Description
1 K1 Drive Input Contactor Set when the K1 contactor is closed.
2: K2 Drive Output Contactor
Setting Value Function Description
2 K2 Drive Output Contactor Set when the K2 contactor is closed.
3: K3 Bypass Contactor
Setting Value Function Description
3 K3 Bypass Contactor Set when the K3 contactor is closed.