HB700 | CPU | PMC921xEx | en | 24-04 141
Deployment CPU iC921xM-FSoE
Sample application > Configuration in iCube Engineer
8.
Please note that, due to the system, the parametrization of the
safety module parameters is only possible via the English language
view
.
To switch languages, open the menu ‘Extras 🠂 Options’ and set the language to
‘English’ at ‘International’.
🡆
9. Save your project.
10. Restart iCube Engineer with your project.
11. To set the module parameters, double-click on the local safety DI module.
To Next Page
Loading...
