YASKAWA iC9200 Series

92 HB700 | CPU | PMC921xEx | en | 24-04
Deployment CPU iC921xM-EC
iC9200 Series
Commissioning > Online access to the CPU
1. To access WBM, click in the ‘Cockpit
’ editor at
.
LAN (X3/X4)
🡆 The WBM login page opens.
Please login with your username and password.
Username
Password
Enter Password
Login
2. Enter your login details and click on [Login].
On delivery
, the following access data are preset with administrator
rights:
− Username: admin
− The password is printed under the front flap on the front of the
CPU.
🡆 You now have access to the WBM of the CPU with the access rights assigned to
you.
3. Navigate to Network in the Configuration area.
🡆 Here you can change the current IP address parameters in the ‘Configuration’
column.
Configuration
Network
Date
and Time
System Services
Web Services
Information
Diagnostics
Security
Administration
iC92...
PMC92...
Network
Configuration
Übersicht ...
4. Enter your new IP address parameters in the ‘Configuration’ column.
CAUTION
When assigning the IP address parameters, please note that the
number ranges of the IP addresses of X1/X2 and X3/X4 must not
overlap if they exist!