6.4
Troubleshooting System Errors
6-21
6
Maintenance and Inspection
[ c ] SVB-01 Module Error Status (Slot 2)
The above error status is meant to check I/O errors when an I/O Module is connected. Errors when SERVOPACKs
and/or MECHATROLINK-
ΙΙ
inverters are connected will not be written. Use the monitoring parameter to check errors
when SERVOPACKs and/or MECHATROLINK-
ΙΙ
inverters are connected.
[ d ] 260IF-01 Module Error Status (Slot 3)
<Error Status Details>
ST#15SW00233
Error code (Station error = 1) Subslot No. (= 1)SW00232
(Bit No.) F 87 0
ST#2 ST#1 Not used
Not usedSW00234 ST#30 ST#17 ST#16
Not usedSW00235 Not used
Not usedSW00236 Not used
Not usedSW00237 Not used
Not usedSW00238 Not used
Not usedSW00239 Not used
ST#15SW00241
Error code (Station error = 1) Subslot No. (= 2)SW00240
(Bit No.) F 87 0
ST#0
ST#31SW00242 ST#16
ST#47SW00243 ST#32
ST#63SW00244 ST#48
Item Code Description
ST#
n
0
Normal communication
1
Communication error at the station n (n = local station
number in slave mode)
To Next Page
Loading...
