4
System Startup and Sample Programs
4.2.3
Saving Data from the MP2300 to Flash Memory, and Transferring Data to Your Computer from the MP2300
4-22
( 2 ) Transferring Data from the MP2300 to Your Computer
Use the following procedure to transfer data from the MP2300 RAM to a computer.
1.
Select Online - Read from Controller from the menu bar of the MPE720 Ver 6.
main window.
The Transfer Program - Read from Controller Dialog Box will appear.
2.
Check the selected items and displayed contents to see if they are correct, and then click the Start
Button.
The project file (sample file) saved in your computer will be overwritten with the data transferred from the
MP2300. When the overwriting is complete, a message box will appear to inform you.
3.
Click the OK Button. Data transfer from the MP2300 to the computer will end.
To Next Page
Loading...
