YASKAWA SGM-A3 - Selecting a Σ-Series Servo; Selecting a Servomotor

5.1 Selecting aΣ -Series Servo
205
5.1 Selecting a Σ-Series Servo
This section describes how to select the Σ-Series Servomotor, Servopack, and Digital
Operator.
5.1.1 Selecting a Servomotor 205...........................................
5.1.2 Selecting a Servopack 212............................................
5.1.3 Digital Operator 216.................................................
5.1.1 Selecting a Servomotor
1) The selection of an SGM or SGMP Servomotor matched to the servo system in which it is
used is based on the servomotor type, that is, the seven alphanumeric characters after
“SGM-” or “SGMP-”, described below. The numbers (1) to (6) below correspond to the
numbers in the flowchart for Servomotor selection on the following pages.
5