No. Name Description
F6-55 DeviceNet Baud Rate Monitor
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1012 and later.
F6-56 DeviceNet Speed Scaling
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
F6-57 DeviceNet Current Scaling
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
F6-58 DeviceNet Torque Scaling
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
F6-59 DeviceNet Power Scaling
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
F6-60 DeviceNet Voltage Scaling
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
F6-61 DeviceNet Time Scaling
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
F6-62 DeviceNet Heartbeat Interval
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
F6-63
Dynamic Output Assembly 109
Parameter 1
Note: Function available in versions
PRG: 1012 and earlier.
Refer to V1000 Technical Manual for details.
MAC ID Memory
Note: Function available in versions
PRG: 1014 and later.
F6-64
Dynamic Output Assembly 109
Parameter 2
Note: Function available in versions
PRG: 1012 and earlier.
Refer to V1000 Technical Manual for details.
Dynamic Output Assembly 109
Parameter 1
Note: Function available in versions
PRG: 1014 and later.
F6-65
Dynamic Output Assembly 109
Parameter 3
Note: Function available in versions
PRG: 1012 and earlier.
Refer to V1000 Technical Manual for details.
Dynamic Output Assembly 109
Parameter 2
Note: Function available in versions
PRG: 1014 and later.
F6-66
Dynamic Output Assembly 109
Parameter 4
Note: Function available in versions
PRG: 1012 and earlier.
Refer to V1000 Technical Manual for details.
Dynamic Output Assembly 109
Parameter 3
Note: Function available in versions
PRG: 1014 and later.
B.1 Parameter Table
180
YASKAWA ELECTRIC TOEP C710606 47A YASKAWA AC Drive – V1000 Quick Start Guide
To Next Page
Loading...
