YASKAWA V1000

No. Name Description
F6-04 bUS Error Detection Time Refer to V1000 Technical Manual for details.
F6-07 NetRef/ComRef Function Selection
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1014 and later.
F6-08 Reset Communication Parameters
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1014 and later.
F6-10 CC-Link Node Address Refer to V1000 Technical Manual for details.
F6-11 CC-Link Communication Speed Refer to V1000 Technical Manual for details.
F6-14 CC-Link bUS Error Auto Reset Refer to V1000 Technical Manual for details.
F6-20 MECHATROLINK Station Address
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1020 and later.
F6-21 MECHATROLINK Frame Size
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1020 and later.
F6-22 MECHATROLINK Link Speed
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1020 and later.
F6-23
MECHATROLINK Monitor
Selection (E)
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1020 and later.
F6-24
MECHATROLINK Monitor
Selection (F)
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1020 and later.
F6-25
Operation Selection at Watchdog
Timer Error (E5)
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1020 and later.
F6-26
MECHATROLINK bUS Errors
Detected
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1020 and later.
F6-30 PROFIBUS-DP Node Address Refer to V1000 Technical Manual for details.
F6-31
PROFIBUS-DP Clear Mode
Selection
Refer to V1000 Technical Manual for details.
F6-32
PROFIBUS-DP Data Format
Selection
Refer to V1000 Technical Manual for details.
F6-35 CANopen Node ID Selection Refer to V1000 Technical Manual for details.
F6-36 CANopen Communication Speed Refer to V1000 Technical Manual for details.
F6-40 CompoNet Node address Refer to V1000 Technical Manual for details.
F6-41 CompoNet Communication Speed Refer to V1000 Technical Manual for details.
F6-50 DeviceNet MAC Address
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
F6-51 DeviceNet Communication Speed
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
F6-52 DeviceNet PCA Setting
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
F6-53 DeviceNet PPA Setting
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
F6-54
DeviceNet Idle Mode Fault
Detection
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
B.1 Parameter Table
YASKAWA ELECTRIC TOEP C710606 47A YASKAWA AC Drive – V1000 Quick Start Guide
179
B
Parameter List