YASKAWA V1000 - Page 193

No. Name Description
L6-08
Mechanical Weakening (OL5)
Detection Operation
Refer to V1000 Technical Manual for details.
L6-09
Mechanical Weakening Detection
Speed Level
Refer to V1000 Technical Manual for details.
L6-10
Mechanical Weakening Detection
Time
Refer to V1000 Technical Manual for details.
L6-11
Mechanical Weakening Detection
Start Time
Refer to V1000 Technical Manual for details.
L7: Torque Limit
Use L7 parameters to configure the torque limit function.
L7-01 Forward Torque Limit
Refer to V1000 Technical Manual for details.
L7-02 Reverse Torque Limit
L7-03
Forward Regenerative Torque
Limit
L7-04
Reverse Regenerative Torque
Limit
L7-06
Torque Limit Integral Time
Constant
Refer to V1000 Technical Manual for details.
L7-07
Torque Limit Control Method
Selection during Accel/Decel
Refer to V1000 Technical Manual for details.
L8: Hardware Protection
Use L8 parameters to configure hardware protection functions.
L8-01
Internal Dynamic Braking Resistor
Protection Selection (ERF type)
0: Resistor overheat protection disabled
1: Resistor overheat protection enabled
L8-02 Overheat Alarm Level Refer to V1000 Technical Manual for details.
L8-03
Overheat Pre-Alarm Operation
Selection
Refer to V1000 Technical Manual for details.
L8-05
Input Phase Loss Protection
Selection
0: Disabled
1: Enabled
L8-07
Output Phase Loss Protection
Selection
0: Disabled
1: Enabled (triggered by a single phase loss).
2: Enabled (triggered when two phases are lost).
L8-09
Output Ground Fault Detection
Selection
Refer to V1000 Technical Manual for details.
L8-10
Heatsink Cooling Fan Operation
Selection
0: Fan On-Run Mode
1: Fan always on
L8-11
Heatsink Cooling Fan Operation
Delay Time
Refer to V1000 Technical Manual for details.
L8-12 Ambient Temperature Setting Refer to V1000 Technical Manual for details.
L8-15
OL2 Characteristics Selection at
Low Speeds
Refer to V1000 Technical Manual for details.
L8-18 Soft CLA Selection Refer to V1000 Technical Manual for details.
B.1 Parameter Table
YASKAWA ELECTRIC TOEP C710606 47A YASKAWA AC Drive – V1000 Quick Start Guide
193
B
Parameter List