No. Name Description
U6-02 Motor Excitation Current (ld) Refer to V1000 Technical Manual for details.
U6-03 ASR Input Refer to V1000 Technical Manual for details.
U6-04 ASR Output Refer to V1000 Technical Manual for details.
U6-05 Output voltage reference (Vq) Output voltage reference (Vq). (q-axis)
U6-06 Output Voltage Reference (Vd) Output voltage reference (Vd). (d-axis)
U6-07 q-axis ACR Output Refer to V1000 Technical Manual for details.
U6-08 d-Axis ACR Output Refer to V1000 Technical Manual for details.
U6-20
Frequency Reference Bias (Up/
Down 2)
Refer to V1000 Technical Manual for details.
U6-21 Offset Frequency Refer to V1000 Technical Manual for details.
U6-80 to
U6-99
Option Monitors 1 to 20 Refer to the V1000 Option Technical Manual for details.
U8: Custom Monitors for DriveWorksEZ
U8 monitors are reserved for DriveWorksEZ
U8-01 to
U8-10
DWEZ Monitors 1 to 10 Refer to the V1000 Option Technical Manual for details.
Note: 1. Cycle power to the drive to enable MEMOBUS/Modbus settings.
2. If using Open Loop Vector Control (A1-02 = 2), Auto-Tuning will need to be performed again after
the drive is initialized. Refer to Auto-Tuning on page 113 for details.
B.1 Parameter Table
YASKAWA ELECTRIC TOEP C710606 47A YASKAWA AC Drive – V1000 Quick Start Guide
201
B
Parameter List
To Next Page
Loading...
