Getting Started
29
2. Enter the desired time in the Dial-now Time-out (seconds) field.
3. Click Confirm to accept the change.
Area codes are also known as Numbering Plan Areas (NPAs). They usually indicate
geographical areas in one country. When entered numbers match the predefined area
code rule, the IP phone will automatically add the area code to the beginning of the
dialed numbers. The IP phones only support one area code rule.
Procedure
Area code rule can be configured using the configuration files or locally.
Create the area code rule and
specify the maximum and
minimum lengths of the entered
numbers.
For more information, refer to Dial
Plan on page 231.
Create the area code rule and
specify the maximum and
minimum lengths of the entered
numbers.
Navigate to:
To Next Page
Loading...
