User Guide for Yealink VC110 Video Conferencing Endpoint
86
2. On endpoint A, select Auto from the pull-down list of Call Type before calling.
3. On endpoint A, dial the account numbers of endpoint B.
Result：
If account polling is disabled, endpoint A can only use its Cloud account (highest priority)
to call endpoint B.
If account polling is enabled, endpoint A will use its Cloud account (highest priority) to call
endpoint B first. If this call fails, endpoint A continues to use its SIP account (next priority)
to call endpoint B.
To configure account polling via web user interface:
1. Click on Setting->Call Features.
2. Select the desired value from the pull-down list of Account Polling.
- If you select Disabled, the endpoint can only call other endpoints using the call type
with the highest priority.
To Next Page
Loading...
