Yealink VC110 - Placing Calls

Using the VC110 Video Conferencing Endpoint
87
- If you select Enabled, the endpoint will attempt to call other endpoint using different
call types according the priority.
3. Click Confirm to accept the change.
Placing Calls
You can place a call in three ways using your VC110 video conferencing endpoint:
 Using the remote control
 Using the video conferencing phone
 Via the web user interface
The VC110 video conferencing endpoint supports two call modes:
 Voice Call
 Video Call
Note
You can search and dial a contact from the call history or local directory. For more information,
refer to Directory on page 61 and Call History Management on page 71.
The endpoint supports placing calls using contact numbers, SIP URI, IP address, H. 323 account
or extension. SIP URI and IP addresses can be up to 32 characters. For example: SIP
URI:2210@sip.com, IP: 192.168.1.15.
For more information, contact your system administrator.