Using the VC110 Video Conferencing Endpoint
93
6. Press (Save soft key) to accept the change.
If the auto answer feature is enabled, the icon will appear on the status bar of the display
device. The icon will appear on the LCD screen of the video conferencing phone.
Auto answer is configurable via the web user interface at the path Setting->Call
Features->Auto Answer/Auto Answer Mute/Auto Answer Multiway.
Do Not Disturb (DND)
You can use DND to reject incoming calls automatically on the endpoint. Callers will receive a
busy message.
You can enable/disable DND for the endpoint via the remote control, video conferencing phone
or web user interface. You can also enable DND for the endpoint to reject incoming call
automatically during an active call.
To enable the DND mode via the remote control:
1. Press (Menu soft key) to enter main menu.
2. Press or to select the Call Features menu.
3. Press or to scroll to DND, and then press to enable this feature.
4. Press (Save soft key) to accept the change.
The icon will appear on the status bar of display device, and “DND ON!” will be
prompted at intervals. The icon will appear on the LCD screen of the video
conferencing phone.
The endpoint will reject all incoming calls automatically, and the icon and numbers of missed
calls are displayed on the status bar of the display device. If the endpoint places a call, after the
call is established, the DND mode will be disabled automatically.
To Next Page
Loading...
