User Guide for Yealink VC110 Video Conferencing Endpoint
64
- If multiple numbers are stored for the contact, press or to highlight the desired
number, and then press or to dial out the number.
To place a call to a local contact via the video conferencing phone:
1. Press the Directory soft key to enter the Directory list.
2. Press or to select the desired directory list.
3. Press the Enter soft key or to view the contacts in the selected directory.
4. Press or to select the desired contact.
You can press the or soft key to change the directory list.
5. Do one of the following:
- If only one number is stored for the contact, press the Send soft key, or
to call the contact.
- If multiple numbers are stored for the contact, press the Enter soft key or to
view the contact numbers.
- Press or to highlight the desired number.
- Press the Send soft key, or to call the contact.
Editing Local Contacts
You can edit local contacts via the remote control or web user interface:
To edit a local contact via the remote control:
1. Press (Call soft key).
2. Press or to select the Directory menu.
3. Press or to select the desired local contact.
4. Press (Detail soft key).
5. Edit contact information.
To Next Page
Loading...
