Customizing the VC110 Video Conferencing Endpoint
77
If the call history is more than one page, you can press or to turn pages.
4. Press (Add to Contact soft key).
5. Enter contact name in the Name field.
You can add more than one number for the contact. For more information, refer to Adding
Local Contacts on page 62.
6. Press (Save soft key) to save the contact.
Call history management feature is configurable via the web user interface at the path
Directory->History.
Call Protocol
The VC110 video conferencing endpoint supports SIP and H.323 call protocols. H.323 is
commonly used to communicate to other video conferencing endpoints. SIP is commonly used
to communicate with other VoIP devices. You can configure which protocol is to be used when
the endpoint is making calls. When the Auto call protocol is used, the endpoint preferentially
uses the H.323 protocol to place calls. If there is no available H.323 account on the endpoint, the
endpoint will switch to the SIP protocol. You can also specify the desired protocol for the
endpoint to place calls via the remote control or web user interface.
Note
Before configuring call protocol, ensure the remote endpoint supports the call protocol too. For
more information, contact your system administrator.