User Guide for Yealink VC110 Video Conferencing Endpoint
104
The display device shows the focus of the camera.
Configuring Camera Presets
Up to 10 presets can be assigned to the numeric key. Each camera preset stores the camera pan,
tilt, and zoom settings. You can store the preset to a numeric key via the remote control or web
user interface. This means that you can adjust the camera to the preset position by pressing a
stored key.
To save the preset of the camera when the endpoint is idle:
1. Press (Preset soft key).
2. Press the navigation key to adjust the angle of the camera or press or to adjust the
focus of the camera.
3. Long press any number key (0-9) on the remote control until the screen prompts ”Preset
Key ‘X’ successfully saved” (“X” stands for the saved key).
Current camera position and focus are stored to the numeric key. You can change the
position of the camera and focus to the preset quickly by pressing the saved key during a
call.
4. Press (Exit soft key) to return to the idle screen.
To adjust the camera to the preset via the remote control when the endpoint is idle:
1. Press (Preset soft key).
2. Press the numeric key that is already associated with a preset.
The camera will adjust to the preset.
3. Press (Exit soft key) to return to the idle screen.
To Next Page
Loading...
