Yealink VC110 - Idle Screen Display

Getting Started
39
Idle Screen Display
Idle screen of the display device
If the endpoint starts up, the idle screen will be shown. The following figure shows an example
of the idle LCD screen:
Name
Description
Time and Date
The phone’s time and date are displayed on the left of
the status bar.
Site name
The site name of the endpoint.
For more information on how to change the site name,
refer to Site Name on page 49.
Status icon
Status icons are displayed in the center of the status bar.
For more information on the status icon, refer to Icons
on Display Device on page 18.
IP address
 LAN: X.X.X.X: Indicates the endpoint has obtained
an IP address.
 Network disconnected: Indicates the endpoint
does not connect to an Ethernet cable. Please
check the Ethernet cable.
 255.255.255.255: Indicates the endpoint fails to