Yealink VC110 - Call Management; Call Mute

User Guide for Yealink VC110 Video Conferencing Endpoint
96
2. Press or to scroll to Remove, and then press .
3. Select the party you want to remove, and then press .
4. Press (Remove soft key).
To remove any party from a multi-way call via the web user interface, go to the path Home
(Hover your cursor over the number of the remote endpoint, and then click ).
Call Management
You can enable mute mode, record video, control the video and change video layout during an
active call.
Call Mute
You can enable mute mode to mute the microphone of the active audio device during an active
call, and then the other party cannot hear you.
To mute a call:
Do one of the following:
- Press on the remote control.
- If VCM60 works as the audio input device of the VC110 video conferencing endpoint.
You can tap to mute the call. The mute indicator LED will illuminate solid red.
- If VCM30 is connected to the Audio In port of cable hub.
You can tap to mute the call. The mute indicator LED will illuminate solid red.