User Guide for Yealink VC110 Video Conferencing Endpoint
90
Placing a Call via web user Interface
To place a call via web user interface:
1. Log into the web user interface.
2. Click Home.
3. Enter the desired number in the Enter Number field.
4. (Optional.) Select the desired call type from the pull-down list of Auto.
5. (Optional.) Select the desired bandwidth from the pull-down list of Auto.
6. Click Video Call or Voice Call.
Placing Multiple Calls
The VC110 video conferencing endpoint can support up to 3-way calls (including the original
caller). The endpoint supports one video call and one voice call. You can use the remote control,
video conferencing phone or web user interface to place multiple calls.
To place a multiple call via the remote control:
1. Place a call to the first party.
2. When the first party answers the call, press (More soft key) to open More screen.
3. Press or to scroll to New Call, and then press to place a new call.
4. Enter the number of the second party, and then press or .
When the second party answers the call, you have created a three-way conference.
By default, the first call is video call, and the second call is voice call.
Note
To place a multiple call via the video conferencing phone:
1. Enter the desired number using the keypad.
2. When the first party answers the call, press New Call soft key to place a new call.
3. Enter the number of the second party, and then press , or the Send soft key.
You can press or to enter the pre-dialing screen during a call.
When you try to invite a new party during the third-way conference, the endpoint will prompt
“Maximum number of sessions reached”.
New incoming call will be rejected automatically during a third-way conference, and the number
of missed calls will be displayed on the display device.
To Next Page
Loading...
