Customizing the VC110 Video Conferencing Endpoint
63
8. Select the desired contact bandwidth from the pull-down list of Bandwidth.
The default contact bandwidth is Auto. The endpoint will select the appropriate bandwidth
automatically.
9. Press (Save soft key) to save the local contact.
Note
You can also add contacts via the web user interface at the path Directory->Local Directory.
Placing Calls to Contacts
You can place calls to local contacts via the remote control, video conferencing phone or web
user interface. If you log into the Yealink Cloud platform, you can also place calls to Cloud
contacts.
To place a call to a local contact via the remote control:
1. Press (Call soft key).
2. Press or to select the Directory menu.
3. Select the desired contact type from the pull-down list of the All Contacts first.
4. Press or to select the desired local contact.
5. Press .
- If only one number is stored for the contact, the contact number will be dialed out
directly.
If the contact already exists in the directory, the display device will prompt “Contact already
exists!”.