Yealink VC110 - Powering the Endpoint On or Off

User Guide for Yealink VC110 Video Conferencing Endpoint
18
Item
Description
 Places a call.
 Answers a call.
⑮
Delete key
 Deletes one character at a time.
 Long press to delete all characters in the input field.
 On the idle screen or during a call, long press it for 2
seconds to start capturing packets and long press it for 2
seconds again to stop capturing packets.
⑯
On-hook Key
 Ends a call or exits from a conference call.
 Returns to the previous screen when not in a call.
⑰
Keypad
 Enters digits.
 Long press to generate a special character “@” in
the input field
 Enters the pre-dialing screen.
 Stores the preset position of the camera.
⑱
Video Recording
Key
 Generates a special characters “.”.
 On the idle screen, press to start/stop recording
video.
 During a call, long press to start/stop recording
video.
⑲
Snapshot Key
 Generates a pound key (#).
 On the idle screen, press to capture the image
from the camera.
 During a call, long press to capture the image from
the camera.
Icon Instructions
Icons on Display Device
Icons appearing on the display device are described in the following table:
Icon
Description
(flashing)
Network is disconnected