Using Cloud Platform
115
Using Cloud Platform
Yealink video conferencing endpoint is compatible with StarLeaf/Zoom/Pexip/BlueJeans/Mind
platform.
Users can access Virtual Meeting Rooms(VMR) using Yealink video conferencing endpoint,
whilst benefiting from both the features provided by Yealink, such as 1080p HD video and audio,
and features provided by StarLeaf/Zoom/Pexip/BlueJeans/Mind, including high end
customization & interoperability.
If you don’t log into Cloud platform or you only log into the Yealink Cloud platform, you can
configure the address of the third-party platform in advance, the platform names will appear on
your display device at the path Call->Dial->Call Type. Even if you don’t log into the third-party
platform, you can also select the desired third-party platform to call corresponding VMRs
quickly. For more information, refer to
Yealink_VC110_All-in-one_HD_Video_Conferencing_Endpoint_Administrator_Guide
This chapter provides the information about using Cloud platform. Topics include:
Using the Yealink Cloud Platform
Using the StarLeaf Cloud Platform
Using the Zoom Cloud Platform
Using the BlueJeans Cloud Platform
Using the Pexip Platform
Using the Mind Platform
Using the Custom Platform
Using the Yealink Cloud Platform
You can log into the Yealink Cloud platform, and dial other Yealink Cloud numbers to establish
calls.
When using the Yealink Cloud account, the VC110 video conferencing endpoint supports 2-way
video calls (an original caller and one other site).
Dialing Yealink Cloud Numbers
To dial Yeaink Cloud numbers via the remote control:
1. Press (Call soft key) or to enter the dialing screen.
2. Select Yealink Cloud from the pull-down list of Call Type before calling.
To Next Page
Loading...
