Yealink VC110 - Adjusting the Camera; Controlling the Camera

Using the VC110 Video Conferencing Endpoint
103
Controlling the Camera
Before placing a video call, you need to be familiar with how to adjust the angle and focus of the
camera. After any adjustment, you can long press numeric key (0-9) to associate the position of
the camera with this key.
Adjusting the Camera
Avoid physically adjusting the camera to prevent damaging it. Always use the remote control to
control the camera.
To adjust the camera when the endpoint is idle via the remote control:
1. Press navigation key to adjust the angle of the camera.
The display device shows the current angle of the camera.
2. Press or to adjust the focus of the camera.